|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DATA SHEET SILICON TRANSISTOR ARRAY PA1453 PNP SILICON POWER TRANSISTOR ARRAY HIGH SPEED SWITCHING USE INDUSTRIAL USE DESCRIPTION The PA1453 is PNP silicon epitaxial Power Transistor Array that built in 4 circuits designed for driving solenoid, relay, lamp and so on. 26.8 MAX. 4.0 PACKAGE DIMENSION (in millimeters) FEATURES 10 MIN. 1.4 0.6 0.1 2.54 1.4 0.5 0.1 1 2 3 4 5 6 7 8 9 10 * Easy mount by 0.1 inch of terminal interval. * High hFE. Low VCE(sat). hFE = 100 to 400 (at IC = -2 A) VCE(sat) = -0.3 V MAX. (at IC = -2 A) 10 2.5 ORDERING INFORMATION Part Number Package 10 Pin SIP Quality Grade Standard PA1453H CONNECTION DIAGRAM Please refer to "Quality grade on NEC Semiconductor Devices" (Document number IEI-1209) published by NEC Corporation to know the specification of quality grade on the devices and its recommended applications. 2 3 5 7 9 4 6 8 10 ABSOLUTE MAXIMUM RATINGS (Ta = 25 C) Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current (DC) Collector Current (pulse) Base Current (DC) Total Power Dissipation Total Power Dissipation Junction Temperature Storage Temperature VCBO VCEO VEBO IC(DC) IC(pulse)* IB(DC) PT1** PT2*** Tj -60 -60 -7 -5 -10 -1.0 3.5 28 150 V V V A/unit A/unit A/unit W W C 1 PIN No. 2, 4, 6, 8 : Base (B) 3, 5, 7, 9 : Collector (C) : Emitter (E) 1, 10 Tstg -55 to +150 C * PW 300 s, Duty Cycle 10 % ** 4 Circuits, Ta = 25 C *** 4 Circuits, Tc = 25 C The information in this document is subject to change without notice. Document No. IC-3519 (O. D. No. IC-6339) Date Published September 1994 P Printed in Japan (c) 1994 PA1453 ELECTRICAL CHARACTERISTICS (Ta = 25 C) CHARACTERISTIC Collector Leakage Current Emitter Leakage Current DC Current Gain DC Current Gain DC Current Gain Collector Saturation Voltage Base Saturation Voltage Turn On Time Storage Time Fall Time SYMBOL ICBO IEBO hFE1 hFE2 hFE3 MIN. TYP. MAX. -10 -10 UNIT TEST CONDITIONS VCB = -50 V, IE = 0 VEB = -5 V, IC = 0 VCE = -1 V, IC = -0.1 A VCE = -1 V, IC = -2 A VCE = -2 V, IC = -5 A -0.3 -1.2 1 2.5 1 V V IC = -2 A, IB = -0.2 A IC = -2 A, IB = -0.2 A IC = -2 A IB1 = -IB2 = -0.2 A . . VCC = -30 V, RL = 15 . . See test circuit A A -- * * * 60 100 50 220 220 100 -0.2 -0.9 400 -- VCE(sat) * VBE(sat) * ton tstg tf s s s * PW 350 s, Duty Cycle 2 % / pulsed SWITCHING TIME TEST CIRCUIT . RL = 15 . VIN IB1 IB2 PW . PW = 50 s . Duty Cycle 2 % T.U.T. IC Base Current Wave Form . VCC = -30 V . Collector Current Wave Form . VBB = 5 V . ton tstg tf 10 % IC 90 % IB2 IB1 2 PA1453 TYPICAL CHARACTERISTICS (Ta = 25 C) DERATING CURVE OF SAFE OPERATING AREA -10 dT - Percentage of Rated Current - % 100 80 60 40 20 IC - Collector Current - A -5 PW 10 = 2 D 50 m m s Li issi m s m pa s ite ti on d SAFE OPERATING AREA S/ -2 -1 bL im ite -0.2 -0.1 0 50 100 150 Ta - Ambient Temperature - C -1 -2 -5 -10 -20 -50 VCE - Collector to Emitter Voltage - V TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE 30 PT - Total Power Dissipation - W PT - Total Power Dissipation - W NEC PA1453 TOTAL POWER DISSIPATION vs. CASE TEMPERATURE 4 Circuits Operation 3 Circuits Operation 2 Circuits Operation 20 1 Circuit Operation 4 3 2 1 4 Circuits Operation 3 Circuits Operation 2 Circuits Operation 1 Circuit Operation 10 0 25 50 75 100 125 Ta - Ambient Temperature - C 150 0 25 50 75 100 125 TC - Case Temperature - C VCEO (MAX.) -100 150 IC = 10*IB -10 DC CURRENT GAIN vs. COLLECTOR CURRENT -10 VCE(sat) - Collector Saturation Voltage - V VBE(sat) - Base Saturation Voltage - V ss Di ip at io d S/ b -0.5 n Li m i te d COLLECTOR AND BASE SATURATION VOLTAGE vs. COLLECTOR CURRENT d ite Lim 1000 hFE - DC Current Gain VCE VC E =- -1 -1.0 VBE (sat) 2.0 V 100 = .0 V -0.1 VC E( sa t) 10 -0.01 -0.1 -1.0 IC - Collector Current - A -10 -0.01 -0.1 -1.0 Ic - Collector Current - A 3 PA1453 TRANSIENT THERMAL RESISTANCE Rth (j-c) - Transient Thermal Resistance - C/W 100 VCE -10 V -10 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE IC - Collector Current - A mA -8 -2 10 -6 00 5 -1 0 m A -10 0m A mA -80 A -60 m -40 mA -30 mA -4 1 -20 mA -2 IB = -10 mA 0 -0.4 -0.8 -1.2 -1.6 VCE - Collector to Emitter Voltage - V 0.1 1 10 PW - Pulse Width - ms 100 0 -2.0 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE -1.0 -3 .5 mA REVERSE BIAS SAFE OPERATING AREA -10 IC - Collector Current - A m -2.5 A mA mA -0.6 -2.0 IC - Collector Current - A -0.8 -3. 0m A -8 -6 -1.5 A -1.0 m -0.2 -2 IB = -0.5 mA 0 0 -10 -20 -30 -40 VCE - Collector to Emitter Voltage - V -50 0 -20 -40 -60 -80 VCE - Collector to Emitter Voltage - V -100 4 VCEO (sus) -0.4 -4 PA1453 REFERENCE Document Name NEC semiconductor device reliability/quality control system. Quality grade on NEC semiconductor devices. Semiconductor device mounting technology manual. Semiconductor device package manual. Guide to quality assurance for semiconductor devices. Semiconductor selection guide. Document No. TEI-1202 IEI-1209 IEI-1207 IEI-1213 MEI-1202 MF-1134 5 PA1453 [MEMO] No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. The devices listed in this document are not suitable for use in aerospace equipment, submarine cables, nuclear reactor control systems and life support systems. If customers intend to use NEC devices for above applications or they intend to use "Standard" quality grade NEC devices for applications not intended by NEC, please contact our sales people in advance. Application examples recommended by NEC Corporation Standard: Computer, Office equipment, Communication equipment, Test and Measurement equipment, Machine tools, Industrial robots, Audio and Visual equipment, Other consumer products, etc. Special: Automotive and Transportation equipment, Traffic control systems, Antidisaster systems, Anticrime systems, etc. M4 92.6 |
Price & Availability of UPA1453 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |